The newest range of power supplies (EV1xx0, EV2xx0, EV3xx0) have the ability to be upgraded with improved firmware. Check this webpage to download the required software:Firmware loader

The firmware files to be programmed into the power supplies can be downloaded here below. For the easiest operation, choose to download to your computer into a sub folder of your documents folder named as follows: (Your Documents)\Consort\Firmware

• It is not possbile to convert a specific model (e.g. EV1450) into another model (e.g. EV2650).
• It is not possible to install a hardware version other than the version of your device. e.g. do not try to install a firmware starting with 2.x into a device starting with version 1.x or vice-versa.
• Do not interrupt the programming of the firmware. This could lead to unpredictable results and cause to have the device returned to factory.

Version 3.3
- Error fail prevention when using low constant current or power at low voltage conditions.
EV2310
EV3020
EV3610

Version 3.2
- Improved serial communication.
- Improved blockade interception at end of run.

EV1450
EV2230
EV2310
EV2320
EV2650
EV3020
EV3150
EV3330
EV3610
EV3620

Version 3.1
- BUGFIX: Correction calculation power values above 214 Watts.

EV3020
EV3150
EV3330
EV3610
EV3620

Version 1.9
- Several bug fixes.
- Last measured values of V/I/W are shown in the report at end of run.

EV2310
EV2650
EV3020

Version 1.6
- Correction kVh timer.
- Data menu allows to erase logged information.
- Several bug fixes.

EV1450

Version 1.4
- USB communication has been improved to improve erroneous communication significantly!
- Event driven data logging has been added!
- Several bug fixes.

EV1450
EV2230
EV2310
EV2320
EV2650
EV3020
EV3150
EV3330
EV3610